مشخصات فنی رنگ رویه کلرو کائوچو به شرح زیر میباشد
Chlorinated Rubber Topcoat 737
Description
Single pack color pigmented chlorinated rubber topcoat
Recommended Use
Suitable coating to prevent electrochemical corrosion with good mechanical strength and proper resistance to normal acid/alkaline conditions
Service temp, below 40°
Surface Preparations
All oil, grease and non-adherent paint should be removed
Substrate/Primer Required for Chlorinated Rubber Topcoat
Apply on properly prepared surface
Topcoat Required
Normally none
Solid Volume: 47±2%
Recommended Film Thickness: Wet 105, Dry 50microns
Theoretical Coverage: 10.5 m2/lit
Color: Based on RAL shades
Gloss: Semi-glossy
Flash Point: 25°C
(depends on color) Specific Gravity: 1.25 g/cm3
Mixing Ratio: Single Pack
Mixing Instruction: Mix thoroughly to a uniform consistency
Spraying Thinner: T-71
Airless Spraying Conditions
“023.-018. | Nozzle |
140kg/cm2 (2000 psi) | Pressure |
Application Conditions Chlorinated Rubber Topcoat
Max |
Min |
|
45°C |
5°C |
Surface |
50°C |
5°C |
Ambient |
80% |
0% |
Humidity |
Drying Times At DFT [50] Microns
Hard Dry | Touch Dry | |
2days |
5hours |
10°C/60RH |
24hours |
4hours |
20°C/60RH |
16hours | 3hours |
30°C/60RH |
Recoating Interval
Max | Min | |
8hours | 10°C/60RH | |
6hours | 20°C/60RH | |
4hours |
30°C/60RH |
Storage Conditions
At least one year in original pack and in a dry and cool conditions (below 35 °C)
Safety Instructions
Take normal precautions and have a proper ventilation while spraying in a confined areas
Note
Use brush or roller for small areas and touch ups
Supplied technical information is based on our laboratory and practical experiences. As the products are often being used under conditions beyond our control, we only guarantee for the quality of our paint itself
جهت خرید رنگ رویه کلرو کائوچو کیمیاهمرنگ با ما تماس بگیرید.
Chlorinated Rubber Topcoat
شرح محصول:
رنگ رویه یک جزئی بر پایه رزین کلرو کائوچو از جمله پوششهای حفاظتی شرکت کیمیا همرنگ است.
موارد مصرف:
این رنگ رویه مناسب جهت جلوگیری از خوردگی الکترولیتهای شیمیایی با مقاومت مکانیکی خوب و مقاوم در برابر اسیدها و بازهای معمولی است.
رنگ رویه کلرو کائوچو برای حرارت های بالای 40درجه سانتی گراد مناسب نمیباشد.
آماده سازی سطح زیر کار:
سطوح می بایست از موارد زیر پاک گردد
- روغن ها
- گریس
- خاک
- رنگهای سست
آستر مورد نیاز :
روی سطوح کاملا تمیز شده اعمال گردد.
آستر کلرو کائوچو با کد 717 پرایمر پیشنهادی این محصول میباشد.
رنگ رویه پیشنهادی:
معمولا نیازی به پوشش بعدی ندارد.
نقد و بررسیها
هنوز بررسیای ثبت نشده است.