مشخصات فنی لایه میانی آلکیدی به شرح زیر میباشد
Alkyd M.I.O Undercoat 124
Description
Phenolic modified alkyd M.I.O. undercoat
Recommended Use of Alkyd M.I.O Undercoat
Good weathering and abrasion resistant properties. Can be used as a non-skid topcoat in mild corrosive environments
Surface Preparations
Primed surface must be dry and free of contaminations
Substrate/Primer Required
Conventional primer
Topcoat Required
can be topcoated with alkyd paints
Solid Volume: 45±2%
Recommended Film Thickness: Wet 100, Dry 50 microns
Theoretical Coverage: 10m2/lit
Color: Silver grey
Gloss: Semi-glossy
Flash Point: 34 °C
Specific Gravity: 1.3 g/cm3
Mixing Ratio: Single pack
Mixing Instruction: Mix thoroughly before and while using
Spraying Thinner: T-10
Airless Spraying Conditions
“021.-018. | Nozzle |
160kg/cm2 (2300 psi) | Pressure |
Application Conditions of Alkyd M.I.O Undercoat
Max |
Min |
|
45°C |
0°C |
Surface |
45°C |
0°C |
Ambient |
80% |
0% |
Humidity |
Drying Times At DFT [50] Microns
Hard Dry | Touch Dry | |
4days |
4hours |
10°C/60RH |
3days |
3hours |
20°C/60RH |
2days | 2hours |
30°C/60RH |
Recoating Interval
Max | Min | |
24hours | 10°C/60RH | |
16hours | 20°C/60RH | |
8hours |
30°C/60RH |
Storage Conditions
At least one year in original pack in a dry and cool conditions (below 35 °C)
Safety Instructions
Take normal precautions, avoid skin or eyes contact and provide proper ventilation
Note
Supplied technical information is based on our laboratory and practical experiences. As the products are often being used under conditions beyond our control, we only guarantee for the quality of our paint itself
جهت خرید لایه میانی آلکیدی کیمیاهمرنگ با ما تماس بگیرید.
Alkyd M.I.O Undercoat
شرح محصول:
این محصول یک آستر یا لایه میانی آلکیدی مدیفای شده با رزین فنولیک حاوی پودر اکسید آهن میکائی از پوششهای حفاظتی شرکت کیمیا همرنگ میباشد.
موارد مصرف لایه میانی آلکیدی :
با مقاومت خوبی که در برابر شرایط آب و هوایی و سایش دارد میتوان از آن به عنوان رنگ رویه ضد لغزش در محیط های در معرض خوردگی استفاده کرد.
آماده سازی سطح زیر کار:
روی سطوح پرایمر خورده تمیز اعمال شود
آستر مورد نیاز :
روی پرایمرهای معمولی قابل اجرا میباشد.
رنگ رویه پیشنهادی:
از رنگهای آلکیدی می توان به عنوان رنگ رویه استفاده نمود. مانند
جهت دریافت قیمت لایه میانی آلکیدی و اطلاعات بیشتر با ما تماس بگیرید.
در مورد رنگ های ضد زنگ بیشتر بدانید:
نقد و بررسیها
هنوز بررسیای ثبت نشده است.